FOR METERING APPLICATIONS REQUIRING FDA AND 3-A SANITARY-STANDARDS
SEEPEX MDC pumps are a range of hygienic metering pumps used in a variety of applications in the food, beverage, pharmaceutical and cosmetic industries to convey low to viscous media as well as shear-sensitive media. The pumps meet the highest hygienic requirements; adhering to 3-A Sanitary standards and have FDA approval.
Cavity design allows for conveyance of liquids, solids, and gases
Ease of operation
Valveless flow control for ease of operation
Performance efficiency
Low slip (internal back flow) provides performance efficiency and less wear on components
Easy maintenance
Simple and predictive maintenance due to minimal components
Residue-free cleaning
Residue-free cleaning through Clean-in-Place (CIP) continuous cleaning
Exact dosing
Additives can be precisely metered without loss. This saves costs for cost-intensive additives
Technologies, Accessories and Options
Technology
Accessories
Options
Pressure branch
In stainless steel, 1/2" connections to DIN EN ISO 228-1 or NPT.
Rotor
Wear resistant and corrosion-proof materials.
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
Tricam geometry
The rotor with Tricam geometry features a three-helix geometry. This enables it to achieve larger conveying capacities with the same overall length of the pump.
Stator
In food-grade materials according to FDA, and in compliance with EHEDG directives. Follows pharma regulations according to several USP classes.
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
Tricam geometry
The rotor with Tricam geometry features a three-helix geometry. This enables it to achieve larger conveying capacities with the same overall length of the pump.
Open pin joint
Open barrel-shaped pin joints that can be cleaned effectively through CIP cleaning.
Shaft sealing
Mechanical seal product flushed and located within the suction area for optimum cleaning.
Lantern
A corrosion resistant design, optionally made of stainless steel, connects the pump and drive and secures the assembly to the base plate or skid.
Plug-in shaft connection
For easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/gland leakage.
Base plate
Tailor-made selection of base plates. The base plates can be easily combined with different drives from all major manufacturers.
Drive
Geared motors, variable speed drives or frequency controlled motors of all major manufacturers, directly flanged to the pump without additional couplings or guards. Covers made of stainless steel are available.
Overpressure Protection
The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.
Seal barrier system
This unit protects the shaft sealing by selectively supplying barrier liquid. Also available with flow meter on request.
Multiple-acting mechanical seal
Mechanical seals arranged in a row. Available in "back-to-back", "face-to-face" or "tandem" sequence.
Single-acting mechanical seal
Universal standard mechanical seal for dosing, food applications and semi-submersible pumps for sealing the plug-in shaft in the suction casing or the hopper.
USA (EN)
