Where hygiene is of critical importance, the BCFH food and hygienic pump from SEEPEX safeguards particularly hygienic processes. The EHEDG Type EL Class I certificate verifies optimal cleaning and sterilization results, which are facilitated by the joint-free Flexrod design, a split suction casing with CFD-optimized geometry, and tangentially positioned flush connections. Thanks to minimal pulsation and shear characteristics, the BCFH food and hygienic pump it is particularly suitable for conveying of sensitive food.
Awarded the EHEDG Type EL Class I certification and certified according to 3-A Sanitary Standards, FDA-approved components
Low pulsation
Minimal pulsation and low shear characteristics allow the gentle conveying of sensitive products – even containing whole pieces
Residue free cleaning
Thanks to CFD-optimized housing geometry, joint-free Flexrod and tangentially positioned flush connections: CIP, SIP, COP
Service-friendly
Quick and simple maintenance without dismantling the suction line thanks to split suction casing – simple release of the Flexrod from the rotor and drive shaft
Process-optimized
Low cleaning costs and reduced production facility downtime due to quick and simple maintenance
Technologies, Accessories and Options
Technology
Accessories
Pressure branch
Made of stainless steel, polished inside, glass bead blown outside. Allows effective draining. Connection as standard to DIN, Tri Clamp® or any other known fittings
Rotor
Wear resistant and corrosion-resistant materials. Optionally with hard surface treatment.
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
Tie bolts/screw
Corrosion proof, optional available in stainless steel design.
Stator
Equal wall or standard design. Seals are an integral part of the elastomer stator. In food grade light and black or Class VI materials.
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
Equal Wall Stator
The stator with uniform wall thickness is used in situations with very high pressures or temperatures.
Base plate
Made of stainless steel, glass bead blown. For the support and attachment of the pump.
Flexrod
Flexible titanium shaft without joints. Hygienic cleaning through CIP and SIP possible. Simple dasassembly of rotor and drive shaft.
Split suction casing
For easy maintenance of the rotating unit and the mechanical seal without dismantling the suction pipe
Suction connection
Patent-pending inlet with CFD-optimized geometry for residue-free cleaning.
Plug-In shaft
Designed for easy CIP, made of stainless steel and designed to mount the mechanical seal in food grade material.
Mechanical seal
Flushed by the product and located inside the suction area for optimal cleaning.
Lantern
A corrosion resistant design, optionally made of stainless steel, connects the pump and drive and secures the assembly to the base plate or skid.
Drive
Geared motors, variable speed drives or frequency controlled motors of all major manufacturers, directly flanged to the pump without additional couplings or guards. Covers made of stainless steel are available.
Overpressure Protection
The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.
USA (EN)
